75C/150C/225C ceiling system comprises 75/150/225 mm X 15 mm. Panels are made of roll formed metal galvanized coil coated steel or aluminium alloy 3105 coils with thickness 0.5mm or 0.7 mm. Aluminium Panels shall be powder coated with 60 microns polyester paint coating on front side or 20 microns front side and 8 microns backside for pre-coated G.I coils. Panels are fixed on to roll formed carriers 30 mm wide X 40 mm deep out of 0.5 mm galvanized steel or 0.9 mm for aluminium sheet with cut outs / prongs to hold the panels in module of 75mm at maximum 1.5 m c/c without insulation and at maximum 1.2 m c/c with insulation. Carriers are suspended from the roof or truss by 4 mm dia. galvanized steel wire rod hanger with special height adjustment suspension clip at max. 1.2 m c/c. Hangers are fixed to the roof by 'J' hooks and nylon inserts. Panels are factory cut in lengths up to maximum 5 m to suit site dimensions or Architect Drawings. G.I. Edge profiles or wall angles are 24 mm X 24 mm X 0.4 mm thick and match the colour of the panel.

84C/184 C ceiling system comprises of 84/184 mm x 12.5 mm panels with 23.9 mm flange roll formed out of metal coils galvanized coil coated steel or aluminium alloy. Panels are fixed on to roll formed carriers 32 mm wide x 39 mm deep out of 0.7/0.9 mm Aluminium or 0.5 mm galvanized steel sheet with cutouts to hold the panels in module of 100/200 mm at maximum 1.6 mm c/c without insulation and at maximum 1.5 mm c/c with insulation. Carriers are suspended from the roof or truss by 4 mm dia. Galvanized steel wire rod hanger with special height adjustment suspension clip at max 1.3 mm c/c. Hangers are fixed to the roof by ceiling bracket. Panels are available in lengths up to maximum 6 mm to suit site dimensions. Edge profiles or wall angles are 24 mm X 24 mm X 0.5 mm thick and match the colour of the panel.

Metal used for construction of both panels and carrier:
Aluminium Alloy AA5050, AA3105 or AA1050 is used to make the panels and carrier. Thickness is 0.5 mm for panels and 0.9/0.7 mm for carriers. Panel are made of Galvanised steel with 180/120 gsm Zinc coating and 20 microns polyester paint coil coating sheets. Panels can be available in 50 microns polyester powder coating galvanized steel with 120/180 gsm Zinc coating or in aluminium alloy in different colours.

Finish of the panels : Panels are available in plain and perforation of 2.5mm and 1.7mm.

84R ceiling system comprises of 84 mm x 16 mm panels without flush profile (for 100 mm module only) roll formed out of metal coils. Panels are fixed on to roll formed carriers 32 mm wide x 39 mm deep made out of 0.9/0.7 mm Aluminium or 0.5 mm galvanised steel sheet with cutouts to hold the panels in module of 100 mm at maximum 1.7 mm c/c without insulation and at maximum 1.5 mm c/c with insulation. Carriers are suspended from the roof or truss by 4 mm dia. galvanized steel wire rod hanger with special height adjustment suspension clip at max. 1.3 mm c/c. Hangers are fixed to the roof by ceiling bracket. Panels are available in max. Lengths up to maximum 6 m to suit site dimensions. Edge profiles or wall angles are 24 mm X 24 mm X 0.5 mm thick and match the colour of the panel. Flush profile can be use in between 2 panels to fill gap of 16mm.

Metal used for construction of both panels and grid: Aluminium Alloy AA5050, AA3105 or AA1050 is used to make the panels carrier. Thickness is 0.5 mm for panels and 0.9/0.7 mm for carriers. Panel are made of Galvanised steel with 180/120 gsm Zinc coating and 20 microns polyester paint coil coating sheets. Panels can be available in 50 microns polyester powder coating galvanized steel with 120/180 gsm Zinc coating or in aluminium alloy in different colours. Finish of the panels : Panels are available in plain and perforation of 2.5 mm and 1.7 mm.

150F LINEAR CEILING SYSTEMS MCRA 150F ceiling system comprises of 150 mm X 17 mm. Panels are fixed on the roll formed out of metal coils galvanized coil coated steel or aluminium alloy. carriers 34.5 mm wide X 48 mm deep out of 0.7/0.9 mm Aluminium or 0.5/0.6 mm galvanised steel with cutouts to hold the panels in module of 150 mm at maximum 1.7 mm c/c without insulation and at maximum 1.5 mm c/c with insulation. Carriers are suspended from the roof or truss by 4 mm dia galvanized steel wire rod hanger with special height adjustment suspension clip at max. 1.3 mm c/c. Hangers are fixed to the roof by ceiling brackets. Panels are available in lengths up to maximum 6 m to suit site dimensions. Edge profiles or wall angles are 24 mm X 24 mm and match the colour of the panel.

Aluminium - Alloy AA5050, AA3105 or AA1050 is used to make the panels and carriers. Thickness is 0.5 mm for panels and 0.7/0.9 mm for carriers. Mild Steel - Galvanized with 180 / 120 gsm Zinc coating. Thickness is 0.5/0.6 mm for panels and 0.6/0.5 mm for carriers.

Finish of the panels: Panels are available in plain andperforation of 2.5mm and 1.7mm.

300C ceiling system comprises of 300mm wide x 30 mm. Panels are made of roll formed 0.5 / 0.7mm thick Aluminium sheet or 0.5 mm thick coil coated G.I sheets with bevel edge, panel length shall be up to 5 mtr. Panels shall be Pre-Coated 20 microns with polyester paint on the front side and 5-8 microns Primer coat on the back side. Powder coated Panels shall have 60 microns polyester paint on the front side only. Panel shall be clipped to Powder Coated G.I carrier of 41.5mm wide x 62mm deep x 0.5mm thick in standard length up to 5 mtr with cut outs to hold the panels in a module of 300mm closed at a distance 1.2 mtr. Panel carrier shall be suspended by means of G.I. suspension rod 4mm diameter and a Stainless steel suspension spring clip at a distance of 1.2 mtr c/c. G.I Edge profiles or wall angles are 24 mm X 24 mm X 0.35 mm thick shall be used on the walls with matching the colour of the panels.

200F ceiling system comprises of 200 mm X 17 mm. Panels are fixed on the roll formed out of metal coils galvanized coil coated steel or aluminium alloy. Carriers 34.5 mm wide X 48 mm deep out of 0.9 mm Aluminium or 0.5 mm galvanised steel with cutouts to hold the panels in module of 200 mm at maximum 1.7 mm c/c without insulation and at maximum 1.5 mm c/c with insulation. Carriers are suspended from the roof or truss by 4 mm dia galvanized steel wire rod hanger with special height adjustment suspension clip at max 1.2 mm c/c. Hangers are fixed to the roof by ceiling brackets. Panels are available in lengths up to maximum 6 mm to suit site dimensions.

Edge profiles or wall angles are 24 mm X 24 mm and match the colour of the panel. Metal used for construction of both panels and carriers : Aluminium - Alloy AA5050, AA3105 or AA1050 is used to make the panels and carriers. Thickness is 0.6 mm for panels and 0.9 mm for carriers. Mild Steel - Galvanized with 180/120 gsm Zinc coating. Thickness is 0.5 mm for panels and 0.5 mm for carriers. Finish of the panels: Panels are available in plain and perforation of 2.5mm and 1.7mm.