Marketing Support 9350852066, 9650133237, 8272081991
CLIP-IN SYSTEMS
MCRA Clip in metal Ceiling System with steel/aluminium tile (600 mm x 600 mm) is manufactured out of 0.50 mm thick polyester coil coated galvanized steel 120 gsm zinc coating or 0.7mm aluminium powder coated with 60 microns polyester paint in AA5050, AA3105 alum. alloy. Clip in tiles can have square or beveled edges. Coil coated steel tile has 20-micron polyester coated finish and back coat of 8-micron alkyd primer. Two sides of each tile are raised and piped and stopped to ensure positive engagement into the spring Clip-in profile, yet allow for demounting of individual tiles. The rigid suspension system consists of rows of 0.5 mm galvanized steel Clip-in profiles of size 40 mm X 17 mm or 34 mm X 24 mm, installed at 600 mm c/c spacing to support the tiles. Suspension Angles are suspended from the roof structure by GI Ceiling Brackets. They are joined to the Clip-in Profiles by Hold-on Clamps. The tiles / planks are held in place by pressure clips. In the flexible system the Hanger and Butterfly Clip replace the suspension angle. Wall angle or Edge Profile are of size 24 mm X 24 mm and 0.4 mm thick. They are made of coil coated steel or aluminium matching the colour of tiles.
Finish of the tiles : Tiles are available in plain and perforation of 1.8, 2.2, 2.5, 5, 14, 16mm.
CLIP IN TILES
Plain Clip In Tile
Perforated Clip In Tile
TECHNICAL DRAWING
ADVANTAGES
- Concealed Metal ceiling design.
- Wide range of standard perforation patterns.
- Wide range of optional wooden patterns.
- Durable and washable polyester powder finish.
- Robust and easy to clean.
- High sound absorption and sound attenuation.
- Environmentally friendly and recyclable.
CLIP-IN SWING DOWN SYSTEMS
MCRA Clip in metal Ceiling Systems made of Galvanized Steel/Aluminium swing-down tiles (600 mm x 600 mm) are manufactured out of 0.50 mm thick polyester coil coated Steel 120 gsm zinc coating or powder-coated with 60-80 microns polyester paint.
Aluminum clip in tiles are manufactured out of 0.70mm thick Aluminum sheets with powder-coated 50 microns polyester paint.
These tiles can have beveled or straight edges. Coil-coated Galvanized Steel tiles have 20-22 microns polyester coated finish on the front side and 5-8 microns alkyd primer coating on the backside.
Finish of the tiles : Tiles are available in plain and perforation of 1.8, 2.2, 2.5, 5, 14, 16mm.
